Small round radishes · bed1-roots
Direct sow. Use a small round spring variety, not daikon; avoid sustained hot weather.
Two beds with separate changeovers
Keep one leafy bed available while the other changes from roots to beans.
Do not clear both beds by calendar alone. Check the predecessor in each bed before marking its next layout.
How to use this plan
Keep each bed’s changeover independent.
- Check your starting point Record whether bed 1 roots and bed 2 leaves have actually finished.
- Choose the next action Change only the cleared bed; keep the other productive until its own decision point.
- Carry out the plan Label both beds, complete each predecessor harvest and mark its next crop without combining paths or volume.
- Keep a useful record Two independent succession chains and separate actual clearing dates.
If conditions change
- A whole-garden task would clear a still-productive bed. Use the bed-specific phase label and postpone only that bed’s successor.
Your next step
Direct sow · Small round radishes
2027-04-03 to 2027-04-17. Check local conditions first.
306 → 144target positions
26 bags40 L · after inventory
Print includes your layout, quantities, sources and the full season. Choose Save as PDF in your browser print dialog.
Your plan, ready to grow
Example dates2 beds · 3 × 6 ft (91.4 × 182.9 cm) · 12 in (30.5 cm) fill depth · 6 hours of sun · Start · Last spring frost · First fall frost
306 → 144target positions by phase
1,019.4 Lusable fill volume
26 bags40 L each · after inventory
29 weeksyour seasonal care plan
Planting layout
Top view · orient tall crops away from the sun-facing edge.
Phase 1 · 306 positions
Phase 2 · 144 positions
| Zone / crop | Positions | Spacing | Season requirement |
|---|---|---|---|
| bed1-roots · Small round radishes | 2881 planting batch | 3 × 3 in76.2 × 76.2 mm | 634 seeds288 seasonal target positions |
| bed2-leaves · Leaf lettuce | 181 planting batch | 12 × 12 in304.8 × 304.8 mm | 40 seeds18 seasonal target positions |
| bed1-beans · Bush snap beansPhase 2 | 721 planting batch | 6 × 6 in152.4 × 152.4 mm | 80 seeds72 seasonal target positions |
| bed2-fall · SpinachPhase 2 | 721 planting batch | 6 × 6 in152.4 × 152.4 mm | 159 seeds72 seasonal target positions |
Square bed spacing is the selected compact planting method. Container spacing describes root positions; foliage may spread beyond the pot. Seed quantities include 10% spare, with 2 small seeds per target and one bean seed per target. Follow cultivar packets if their spacing or sowing instructions differ.
Planting windows
Soil and weather decide the actual planting day.
Leaf lettuce · bed2-leaves
Direct sow. Avoid heat and bolting; sow only in workable soil.
Bush snap beans · bed1-beans
Direct sow. Wait for frost risk to pass and soil to reach at least 60°F (16°C); check the local forecast. Clear the preceding crop completely first.
Complete first: bed1-roots-1-clear.Spinach · bed2-fall
Direct sow. Sow in cool, workable soil; hot days and long daylight can cause bolting. Clear the preceding crop completely first.
Complete first: bed2-leaves-1-clear.From planting to clearing
Estimated cycles fit.
These are planning windows. Record what actually happens in your season journal; clear the space before starting the next crop.
bed1-roots · Small round radishesPhase 1 · batch 1
- Sow2027-04-03 to 2027-04-17
Use a small round spring variety, not daikon; avoid sustained hot weather. Plant only when the seed packet and local weather conditions agree.
- Seedlings2027-04-06 to 2027-04-27
Thin early after emergence; a crowded root will not size well. Thin toward 288 positions at 76 × 76 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- Tend2027-04-10 to 2027-05-21
Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Harvest check2027-04-28 to 2027-05-29
Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Clear / review2027-06-01 to 2027-06-01
Remove spent plants and check the soil before a successor starts. 7 harvest days and 3 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
bed2-leaves · Leaf lettucePhase 1 · batch 1
- Sow2027-04-03 to 2027-04-17
Avoid heat and bolting; sow only in workable soil. Plant only when the seed packet and local weather conditions agree.
- Seedlings2027-04-09 to 2027-05-01
Mist the surface gently; small seeds must not be washed away. Thin toward 18 positions at 305 × 305 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- Tend2027-04-10 to 2027-06-15
Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Harvest check2027-05-18 to 2027-07-07
Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Clear / review2027-07-10 to 2027-07-10
Remove spent plants and check the soil before a successor starts. 21 harvest days and 3 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
bed1-beans · Bush snap beansPhase 2 · batch 1
- Sow2027-06-02 to 2027-06-02
Wait for frost risk to pass and soil to reach at least 60°F (16°C); check the local forecast. Clear the preceding crop completely first. Plant only when the seed packet and local weather conditions agree.
- Seedlings2027-06-09 to 2027-06-16
Use one sound seed per position; replace failures only when soil remains warm. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- Tend2027-06-09 to 2027-08-05
Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Harvest check2027-07-22 to 2027-08-27
Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Clear / review2027-09-03 to 2027-09-03
Remove spent plants and check the soil before a successor starts. 21 harvest days and 7 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
bed2-fall · SpinachPhase 2 · batch 1
- Sow2027-07-24 to 2027-08-07
Sow in cool, workable soil; hot days and long daylight can cause bolting. Clear the preceding crop completely first. Plant only when the seed packet and local weather conditions agree.
- Seedlings2027-07-31 to 2027-08-28
Keep the seedbed evenly moist and protect newly emerging leaves. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- Tend2027-07-31 to 2027-09-30
Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Harvest check2027-09-02 to 2027-10-14
Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Clear / review2027-10-14 to 2027-10-14
Remove spent plants and check the soil before a successor starts. 14 harvest days and 3 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
What to buy
Owned items are deducted before buying.
| Supply | Required | Already owned | Buy |
|---|---|---|---|
| Raised-bed growing mix | 1,019.4 L | 0 L | 26 × 40 L bags |
| Position labels (reuse after a crop clears) | 360 each | 0 each | 360 each |
| Measuring tool | 1 each | 0 each | 1 each |
| Gentle watering tool | 1 each | 0 each | 1 each |
| Small round radishes · bed1-roots | 634 seeds | 0 seeds | 634 seeds |
| Leaf lettuce · bed2-leaves | 40 seeds | 0 seeds | 40 seeds |
| Bush snap beans · bed1-beans | 80 seeds | 0 seeds | 80 seeds |
| Spinach · bed2-fall | 159 seeds | 0 seeds | 159 seeds |
Mix: 1,019.4 L theoretical × 1 allowance = 1,019.4 L; minus 0 L owned = 1,019.4 L net. Buying 1,040 L leaves 20.6 L beyond the net requirement. Allowance is your choice; no fixed compaction loss is assumed.
Your full season
29 weeks, through harvest checks and bed clearing. Check off each week as you work.
01Prepare and begin2027-04-01 — 2027-04-07To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- Measure the usable space. Prepare 1019.4 L of raised-bed growing mix before allowance. Do not clear both beds by calendar alone. Check the predecessor in each bed before marking its next layout.
- bed1-roots (Small round radishes), batch 1: Direct sow. Use a small round spring variety, not daikon; avoid sustained hot weather. Plant only when the seed packet and local weather conditions agree.
- bed1-roots (Small round radishes), batch 1: Check emergence and thin. Thin early after emergence; a crowded root will not size well. Thin toward 288 positions at 76 × 76 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-leaves (Leaf lettuce), batch 1: Direct sow. Avoid heat and bolting; sow only in workable soil. Plant only when the seed packet and local weather conditions agree.
02Check, tend and act · week 22027-04-08 — 2027-04-14To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Direct sow. Use a small round spring variety, not daikon; avoid sustained hot weather. Plant only when the seed packet and local weather conditions agree.
- bed1-roots (Small round radishes), batch 1: Check emergence and thin. Thin early after emergence; a crowded root will not size well. Thin toward 288 positions at 76 × 76 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Direct sow. Avoid heat and bolting; sow only in workable soil. Plant only when the seed packet and local weather conditions agree.
- bed2-leaves (Leaf lettuce), batch 1: Check emergence and thin. Mist the surface gently; small seeds must not be washed away. Thin toward 18 positions at 305 × 305 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
03Check, tend and act · week 32027-04-15 — 2027-04-21To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Direct sow. Use a small round spring variety, not daikon; avoid sustained hot weather. Plant only when the seed packet and local weather conditions agree.
- bed1-roots (Small round radishes), batch 1: Check emergence and thin. Thin early after emergence; a crowded root will not size well. Thin toward 288 positions at 76 × 76 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Direct sow. Avoid heat and bolting; sow only in workable soil. Plant only when the seed packet and local weather conditions agree.
- bed2-leaves (Leaf lettuce), batch 1: Check emergence and thin. Mist the surface gently; small seeds must not be washed away. Thin toward 18 positions at 305 × 305 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
04Check, tend and act · week 42027-04-22 — 2027-04-28To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Check emergence and thin. Thin early after emergence; a crowded root will not size well. Thin toward 288 positions at 76 × 76 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-roots (Small round radishes), batch 1: Check harvest readiness. Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-leaves (Leaf lettuce), batch 1: Check emergence and thin. Mist the surface gently; small seeds must not be washed away. Thin toward 18 positions at 305 × 305 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
05Check, tend and act · week 52027-04-29 — 2027-05-05To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-roots (Small round radishes), batch 1: Check harvest readiness. Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-leaves (Leaf lettuce), batch 1: Check emergence and thin. Mist the surface gently; small seeds must not be washed away. Thin toward 18 positions at 305 × 305 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
06Check, tend and act · week 62027-05-06 — 2027-05-12To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-roots (Small round radishes), batch 1: Check harvest readiness. Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
07Check, tend and act · week 72027-05-13 — 2027-05-19To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-roots (Small round radishes), batch 1: Check harvest readiness. Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
08Check, tend and act · week 82027-05-20 — 2027-05-26To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Tend the growing crop. Check swelling roots; maintain even moisture and clear any spent batch before re-sowing. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-roots (Small round radishes), batch 1: Check harvest readiness. Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
09Check, tend and act · week 92027-05-27 — 2027-06-02To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-roots (Small round radishes), batch 1: Check harvest readiness. Pull one sample root at edible size; remove woody or flowering plants before another batch. The 25–35-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-roots (Small round radishes), batch 1: Clear and review the planting. Remove spent plants and check the soil before a successor starts. 7 harvest days and 3 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-beans (Bush snap beans), batch 1: Direct sow. Wait for frost risk to pass and soil to reach at least 60°F (16°C); check the local forecast. Clear the preceding crop completely first. Plant only when the seed packet and local weather conditions agree.
10Check, tend and act · week 102027-06-03 — 2027-06-09To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-beans (Bush snap beans), batch 1: Check emergence and thin. Use one sound seed per position; replace failures only when soil remains warm. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
11Check, tend and act · week 112027-06-10 — 2027-06-16To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-leaves (Leaf lettuce), batch 1: Tend the growing crop. Check the growing center and take small outer leaves without uprooting the plant. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-beans (Bush snap beans), batch 1: Check emergence and thin. Use one sound seed per position; replace failures only when soil remains warm. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
12Check, tend and act · week 122027-06-17 — 2027-06-23To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
13Check, tend and act · week 132027-06-24 — 2027-06-30To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
14Check, tend and act · week 142027-07-01 — 2027-07-07To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-leaves (Leaf lettuce), batch 1: Check harvest readiness. Pick usable outer leaves before bitterness or a flowering stalk develops. The 45–60-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
15Check, tend and act · week 152027-07-08 — 2027-07-14To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-leaves (Leaf lettuce), batch 1: Clear and review the planting. Remove spent plants and check the soil before a successor starts. 21 harvest days and 3 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
16Check, tend and act · week 162027-07-15 — 2027-07-21To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
17Check, tend and act · week 172027-07-22 — 2027-07-28To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-beans (Bush snap beans), batch 1: Check harvest readiness. Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Direct sow. Sow in cool, workable soil; hot days and long daylight can cause bolting. Clear the preceding crop completely first. Plant only when the seed packet and local weather conditions agree.
18Check, tend and act · week 182027-07-29 — 2027-08-04To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-beans (Bush snap beans), batch 1: Check harvest readiness. Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Direct sow. Sow in cool, workable soil; hot days and long daylight can cause bolting. Clear the preceding crop completely first. Plant only when the seed packet and local weather conditions agree.
- bed2-fall (Spinach), batch 1: Check emergence and thin. Keep the seedbed evenly moist and protect newly emerging leaves. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
19Check, tend and act · week 192027-08-05 — 2027-08-11To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Tend the growing crop. Keep pods and foliage dry where possible; bush varieties need no trellis. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed1-beans (Bush snap beans), batch 1: Check harvest readiness. Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Direct sow. Sow in cool, workable soil; hot days and long daylight can cause bolting. Clear the preceding crop completely first. Plant only when the seed packet and local weather conditions agree.
- bed2-fall (Spinach), batch 1: Check emergence and thin. Keep the seedbed evenly moist and protect newly emerging leaves. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
20Check, tend and act · week 202027-08-12 — 2027-08-18To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Check harvest readiness. Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Check emergence and thin. Keep the seedbed evenly moist and protect newly emerging leaves. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
21Check, tend and act · week 212027-08-19 — 2027-08-25To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Check harvest readiness. Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Check emergence and thin. Keep the seedbed evenly moist and protect newly emerging leaves. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
22Check, tend and act · week 222027-08-26 — 2027-09-01To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Check harvest readiness. Pick tender snap pods before seeds inside become prominent. The 50–65-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Check emergence and thin. Keep the seedbed evenly moist and protect newly emerging leaves. Thin toward 72 positions at 152 × 152 mm when true leaves appear. Keep stronger seedlings. Re-sow gaps only when temperatures and remaining season are suitable.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
23Check, tend and act · week 232027-09-02 — 2027-09-08To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed1-beans (Bush snap beans), batch 1: Clear and review the planting. Remove spent plants and check the soil before a successor starts. 21 harvest days and 7 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
24Check, tend and act · week 242027-09-09 — 2027-09-15To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
25Check, tend and act · week 252027-09-16 — 2027-09-22To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
26Check, tend and act · week 262027-09-23 — 2027-09-29To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
27Check, tend and act · week 272027-09-30 — 2027-10-06To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-fall (Spinach), batch 1: Tend the growing crop. Look for a developing flower stalk; use leaves early if heat is approaching. Check moisture, surviving plants, weeds, support and visible crop stage; adjust to rain, heat and drainage.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
28Check, tend and act · week 282027-10-07 — 2027-10-13To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- Recount surviving plants before buying replacements. Check remaining seed, seedling and growing-mix inventory.
29Finish and review the season2027-10-14 — 2027-10-20To do
- Check moisture by touch in each active root zone; adjust watering to rain, heat and drainage. Containers may need checks between weekly visits.
- bed2-fall (Spinach), batch 1: Check harvest readiness. Take outer leaves at usable size; replace the crop once it bolts. The 40–55-day range begins at direct sowing; check the cultivar and actual crop. Record what is actually ready; this estimate is not a yield guarantee.
- bed2-fall (Spinach), batch 1: Clear and review the planting. Remove spent plants and check the soil before a successor starts. 14 harvest days and 3 clearing days are planning allowances; actual crop condition decides the changeover. Record actual harvests or losses. Keep healthy perennial clumps if you are not reusing their space; revise the next planting accordingly.
- Review harvest and crop-loss records, clear or retain plants as appropriate, and update remaining stock before planning the next season.
Assumptions and sources
- Spacing is for the selected compact planting method; follow your cultivar packet where it differs.
- Seed allowance and minimum root-space limits are planning choices, not germination or yield guarantees.
- Dates are preparation windows, not forecasts. Confirm soil temperature, weather and actual crop stage.
- First fall frost is a conservative planning boundary, including for hardy crops. Continuing beyond it needs suitable local guidance and protection.
- Harvest and clearing durations are planning allowances. A successor waits for the final preceding batch to clear; actual crop progress may move those dates.
Fall plans use a 14-day buffer beyond estimated maturity. Successors wait for the final preceding batch, including its harvest allowance and clearing period. The lifecycle shows those crop-specific windows; the zone must actually be empty. Minimum sun and root-space thresholds are planning limits, with cultivar and climate variation.
- UMN Extension: Growing radishesSmall round radishes need thinning; our 3-inch cells exclude large daikon varieties. Accessed 2026-10-04.
- UMD Extension: Growing vegetables in containers and salad tablesSun exposure, drainage, growing media and crop-specific minimum volumes; our thresholds are conservative planning settings. Accessed 2026-10-13.
- UMN Extension: Planting the vegetable gardenCool and warm season establishment; weather and soil readiness matter. Minnesota month dates are not used as global dates. Accessed 2026-10-13.
- UMN Extension: Planting for fall harvestMaturity is a cultivar-dependent estimate; our extra 14-day fall buffer is an explicit planning assumption. Accessed 2026-10-13.
- UMN Extension: Growing lettuceFull-size leaf lettuce plant distance is 10–12 inches. Our 12-inch square cells use an intensive bed layout rather than conventional row aisles. Accessed 2026-10-04.
- UMN Extension: Growing beansDirect sow bush beans in warm soil. Six-inch square cells are our compact-bed setting, not the conventional row spacing in this source. Accessed 2026-10-04.
- UMD Extension: Growing spinachCool-season spinach and final thinning distance. Six-inch cells are our selected intensive-bed method. Accessed 2026-10-04.
Plan garden-42 · version 2 · calculation 2. Actual germination, harvest and local climate performance have not been field tested.
Saved plans & local activity
This activity file stays on this device and excludes your dates, dimensions and inventory. Anonymous site statistics are described in our privacy page.
More plans for this space
Multiple beds · 6+ hours sun
Two 2×4 beds
Two independent beds, with a path excluded from all planting and fill totals.
Leaf lettuce · Bush snap beans
Multiple beds · 6+ hours sun
Three beds with a crop-family ledger
Keep three botanical families in separate beds and retain a map for next-season choices.
Bunching onions · Small-root beets · Compact kale
Multiple beds · 6+ hours sun
Two beds with different crop finish dates
Keep the long tomato harvest in one bed while a second bed changes to fall greens.
Tiny Tim dwarf tomato · Small round radishes · Compact pak choi